Roof coil forming machine is an important equipment used for the production of roof waterproof coil, its operation involves a number of key links, the following are some important matters about the operation of roof coil forming machine:
1. Preparation before the operation
Before operating the roof rolling machine, the operator should carefully check the appearance of the equipment and whether the components are in good condition to ensure that the power cord and control line are normal. At the same time, the lubrication system of the equipment should be checked to ensure that each lubricating point is filled to ensure the normal operation of the equipment. In addition, the operator shall also confirm whether the quality and specifications of the raw materials meet the production requirements.
2. operatonal process
After starting the equipment, the operator shall adjust the parameters of the equipment, such as speed, temperature, according to the production requirements. During the feeding process, ensure that the raw materials enter the equipment evenly to avoid causing equipment blockage or affecting the product quality. At the same time, operators should pay close attention to the operation state of the equipment, if there is abnormal sound, temperature rise and other phenomena, should immediately stop for inspection.
3. Safety precautions
When operating the roof rolling material molding machine, the operator must wear good protective equipment, such as gloves, glasses, etc., to prevent accidental injuries. It is strictly prohibited to repair and adjust during the operation of the equipment. In addition, the operators should be professionally trained and familiar with the operation procedures of the equipment to ensure safe production.
4. plant maintenance
After the operation, the operator shall clean up the impurities and dust on the equipment in time to keep the equipment clean. At the same time, the equipment should be lubricated and maintained to extend the service life of the equipment. In case of equipment failure, it shall stop immediately and notify the maintenance personnel for maintenance.
To sum up, the operation of the roofing rolling material forming machine involves many aspects, and the operators should strictly follow the operating procedures to ensure the production safety and product quality.