During the operation of the tray frame rolling forming machine, a series of operation specifications and safety matters should be strictly followed to ensure the production efficiency and operation safety. The following is the operation of the tray frame rolling forming machine:
1. Preparation before the operation
Operators shall be professionally trained to be familiar with the equipment performance and operation procedures. Before starting up, carefully check whether all parts of the equipment are normal to ensure that there are no impurities, workpiece or tools left in the equipment. At the same time, operators should be equipped with necessary protective equipment, such as safety helmets, protective glasses, earplugs and protective gloves.
2. Notes for the operation process
During the operation, the operator should keep the attention, it is strictly prohibited to directly contact the roller or workpiece with the hand, and must use special tools for operation. When the equipment runs, certain noise and vibration, operators should wear earplugs and wrist pads and other protective equipment. In addition, the working parameters of the equipment should be adjusted regularly to ensure that the workbench height and roller pressure meet the process requirements.
3. Equipment operation monitoring
Operators should pay close attention to the operating state of the equipment. If abnormal vibration, noise or hydraulic oil leakage is found, they should stop the machine immediately for inspection. At the same time, the equipment should be lubricated regularly to ensure the safe operation of the equipment.
4. End of operation and equipment maintenance
After the work, the operator should turn off the power supply of the equipment and clean the debris on the working table and roller. In addition, the equipment shall be maintained and regularly, including replacement of badly worn parts and inspection of electrical systems to ensure that the equipment is in good running condition.
To sum up, the operation of the tray frame rolling forming machine involves the pre-operation preparation, operation process precautions, equipment operation monitoring, operation end and equipment maintenance. Following these matters can ensure the safe and efficient operation of the equipment.