As a common metal processing equipment, hydraulic bending machine needs to pay special attention to safety and equipment maintenance in the operation process to ensure production efficiency and personnel safety. The following are the precautions when operating hydraulic bending machine:
Before operation, a comprehensive inspection of the hydraulic bending machine should be conducted to ensure that the power supply is normal, all mechanical components are intact, the oil tank has been filled with an appropriate amount of hydraulic oil, and there is no leakage in the hydraulic system. The electrical system must also be functioning properly, with no signs of wear or damage to the cables. Additionally, operators must wear appropriate protective gear, such as a safety helmet, protective glasses, earplugs, safety shoes, and slip-resistant gloves, to ensure personal safety.
During the operation, the operator should place the steel bars or metal sheets to be processed on the work plate and secure them to prevent sliding or popping out during bending. When adjusting the bending angle and mold, use specialized tools and ensure the mold is securely installed. Before starting the hydraulic pump to begin bending, make sure there are no other people or obstacles in the work area to avoid accidents.
During the bending process, the operator should pay close attention to the operating state of the equipment. If abnormal sound, vibration or high temperature is found, the machine should be stopped immediately for inspection to avoid equipment damage or accidents. At the same time, it is strictly prohibited to leave the workbench during the operation to ensure that emergencies can be dealt with at any time.
After bending is completed, promptly clean the workbench and mold to remove metal chips and debris, keeping the equipment clean. Before turning off the power, ensure the equipment has completely stopped and lock the electrical switch box to prevent accidental operation by others. Additionally, regular maintenance and care of the equipment are necessary, including checking the hydraulic system, electrical system, and mechanical transmission system, to ensure long-term stable operation of the equipment.
In short, the operation of hydraulic bending machine should strictly comply with safety regulations to ensure personnel safety and normal operation of equipment.