As an important metal processing equipment, the rolling forming machine of beam purlin should pay attention to the following matters in the process of use to ensure the safe operation and processing efficiency of the equipment:
1. Equipment inspection and maintenance
Before using the beam and purlin rolling forming machine, a comprehensive inspection of the equipment should be conducted to ensure all connections are secure, installation bolts and nuts are tightened, and lubricating oil is sufficient. At the same time, regular maintenance and care of the equipment should be carried out, including cleaning, tightening pipe joints, and checking accumulator pressure, to prevent production interruptions caused by equipment failure.
2. Mold installation and debugging
The installation and commissioning of molds are crucial steps in the use of beam purlin rolling forming machines. When installing the mold, power must be cut off, and the process should follow the specified procedures to ensure that the four edges of the upper and lower molds fit together evenly, with the distance between them equal to the thickness of the required tile blanks. During commissioning, start with an empty run to check for any vibrations, noise, or other abnormalities. Production can only proceed once everything is normal.
3. Operation standards and safety
During the operation, strictly adhere to the operating procedures to prevent personnel injuries or equipment damage caused by improper handling. At the same time, maintain stable working voltage to avoid excessive voltage fluctuations that could harm the equipment. Additionally, operators must not privately replace hydraulic components; if a fault occurs, promptly analyze the cause and have it repaired by a technician.
4. Processing parameter control
When using beam and purlin rolling forming machine to process workpieces, the processing parameters should be strictly controlled, including processing pressure, roller rotation speed, etc., to ensure the processing effect and processing accuracy.
In short, the above matters should be paid attention to in the use of beam rolling forming machine to ensure the safe operation and processing efficiency of the equipment.