Fully automatic interchangeable CZ purlin roller is an advanced production equipment, which combines the functions of C-shaped steel and Z-shaped steel machine, and can realize the interchangeable production of various specifications of C/Z purlin in a short time. The following is the use method of this equipment:
1. Equipment start-up and preparation
1. Ensure that the equipment is correctly installed and powered on.
2. Open the PLC control cabinet and input parameters such as the length, longitudinal hole spacing and quantity of purlins according to production requirements.
3. Check whether the raw materials on the feeding rack are flat to ensure that the quality of raw materials meets the production requirements.
2. Production process
1. Start the equipment, and the raw material enters the leveling device through the discharge rack for leveling.
2. The raw material after leveling enters the punching area and automatically punches according to preset parameters.
3. After drilling, the raw material enters the roller pressing forming machine and is pressed by multiple forming rollers to form the required C/Z type purlin.
4. After forming, the purlin is cut to a fixed length by a cutting device and cut accurately according to the preset length.
5. The purlins after cutting are transported to the receiving platform and wait for subsequent bundling and delivery.
3. Precautions
1. In the production process, we should pay close attention to the operating state of the equipment, and stop the machine for inspection in time if there is any abnormality.
2. Regular maintenance and maintenance of equipment to ensure the stability and durability of equipment.
3. Operators should be familiar with the operation process and safety specifications of the equipment to ensure production safety.
The use of fully automatic interchangeable CZ purlin roller is simple and efficient, which can greatly improve production efficiency and reduce production cost. It is the preferred equipment in the field of steel structure production.