What's the matter with the deviation of the mechanical pressure plate of the color steel tile, what should I do? In order to solve your problems, we have summarized this article on the debugging method of the deviation of the color steel tile press for your reference, and hope to help you.
1. The sides and ends of the color board are overlapped. When installing each steel plate, the edge lap should be accurately placed on the previous steel plate and clamped with the previous steel plate until the two ends of the steel plate are fixed. An easy way to do this is to clamp the overlapping steel plates with pliers. When placing the steel plate in the longitudinal direction, use pliers to clamp one end of the steel plate, especially the upper end, to ensure that one end of the steel plate is in place, and the overlap position of one end is also correct to fix the steel plate. During the fixing process, the clamp should always clamp the steel plate longitudinally.
2. There are two fixing methods for installing the color steel tile pressing machine: straight-through type and concealed type. Penetration fixing is a common method for installing roof and wall color steel tile presses, that is, using self-tapping screws or rivets to fix color steel plates on supports. Penetration fixation is classified as crest fixation, trough fixation or a combination of them. The concealed fixing of hidden fasteners is to fix the hidden fasteners matched with the hidden fastener color plate on the support, and the main rib of the colored plate and the ribs of the hidden fastener are toothed , commonly used for installing roof panels.
3. In the design of large-span and large-area factory buildings, in order to have sufficient brightness, a lighting strip is usually designed, which is usually arranged in the middle of each span. Although the setting of the daylighting panel increases the illuminance, it also increases the heat transfer from the sun and the temperature in the building.
4. Select self-tapping screws. When choosing a fixing screw, the fixing part should be selected according to the service life of the structure, and the thickness of the purlin should not exceed the self-drilling capacity of the screw. Currently available screws can have plastic heads, stainless steel caps or be coated with a special durable protective coating. In addition, in addition to the screws for snap-fit, other screws are equipped with washers, and corresponding special washers are also provided for lighting panels and special wind pressures.
5. The installation of the color board is easy to master, and the processing of some details is more important. For color panels used for roofs, the panels should be closed at the roof and eaves to prevent rainwater from entering the roof.