Working principle of elevator profile forming machine
2023-06-21
Elevator profile forming machine, also known as bending arch machine, is mainly used for bending I-beams, channel steels, angle steels, and U-beams, such as tunnels, subways, hydropower stations, underground tunnels, etc. A new type of equipment used for processing and manufacturing tunnel support steel frames. It consists of six parts: the base, machine transmission, cold bending system, hydraulic system, electronic control system, and auxiliary system. Let the manufacturer of the elevator profile forming machine take you to a detailed understanding of the working principle of the cold bending machine today.
This machine is composed of a cold sound machine body, hydraulic equipment, and its connected conveying rods and control equipment. In addition, according to operational requirements, cold transformation equipment manufacturers can arrange hand carts and roller conveyors on the left and right sides of the machine. The console is movable and can be freely moved to convenient places, achieving long-distance control and cutting operations through buttons. When bending, the bending machine equipment manufacturer can observe the pre drawn contour on the operation button while accurately bending. Since all buttons are micro moving, as long as the fingers are separated from the buttons, the operation will stop.
During operation, the manufacturer of the cold bending forming mechanism places the cold bending steel between two automatic compartments through an auxiliary system sleeve support, activates the hydraulic system, and causes the hydraulic cylinder to push the dovetail groove. The cold bending steel waits to meet the design requirements. Close the hydraulic system and activate the mechanical transmission system in the shape to rotate the automatic rod, and drive the section steel to move smoothly and slowly through friction, thus achieving continuous cold bending operations. At the end of the cold bending, close the mechanical transmission system and simultaneously activate the hydraulic system to retract the hydraulic cylinder. The manufacturer of the cold formed profile forming machine places the cold formed steel on the door bracket of the auxiliary system. This cold bending operation ensures the strength of the material, improves the quality of the supporting steel, and greatly improves the work efficiency, while the operation is simple and clear.