1. Before using the C-shaped steel machine and the Z-shaped steel machine equipment, it is necessary to check whether the connections are firm, whether the installation bolts and nuts are tightened, and enough lubricating oil should be added to the left and right chassis before the Z-shaped steel machine can be powered on for a test run.
2. First, run the empty car for self-study observation, whether there is vibration, noise, whether oil is coming from the oil window, and whether the movement of each component is coordinated.
3. The encoder is strictly prohibited from mechanical impact. There is a glass disc inside the encoder. After impact, the glass will be broken and the encoder will be damaged.
4. During the use of the equipment, special attention must be paid to the surrounding personnel within a range of 5 meters before and after feeding or discharging, and pay attention to safety to prevent accidental personal injury.
5. During the use of the equipment, no person is allowed to pass between the unloading rack and the main machine, and between the main machine and the discharge table, so as to prevent the workpiece from being transmitted and hurt people.
6. When the oil pump motor is not stopped, it is strictly forbidden for the operator to put his hand into the mouth of the forming scissors to prevent the forming scissors from malfunctioning and causing work accidents.
7. When the rolling mill is not stopped, it is strictly forbidden for the operator to reach into the rolling mill and touch the profiled plate to check the rolling condition.
8. Do a good job of moisture-proof work during on-site construction.
9. If it is not used for a long time, apply anti-rust oil on the surface of the roller, butter on the chain, and cover it with a tarpaulin.