The strip steel is fed from the tail of the equipment and limited into C-section steel through various pressure rollers, and sent out from the head of the machine. In the traditional technology, the C-section steel needs to be manually cut in fixed length after forming, and then transported to the punching equipment to punch according to the scale required by customers. The production cannot be connected and the power is not high. Through the gradual improvement of production technology, the automatic control of the whole technical process is finally realized, the production power is advanced by leaps and bounds, and the technical content and added value of customer equipment are increased.
When selecting the type of C-beam machine, we should consider their different characteristics. In the light steel industrial plant, when there is a large hanging load or moving load, we can think about abandoning the portal rigid frame and selecting the grid frame.
C-type steel machine belongs to high-efficiency and economic cutting profile (other cold-formed thin-walled section steel, profiled steel plate, etc.). Due to the fair section shape, they can make the steel more efficient and advance the cutting ability. Unlike the general I-shape, the wing embroidery of H-shaped steel is widened, and the inner and outer surfaces are usually parallel, which is convenient to connect with high-strength bolts and other components. Its scale constitutes a fair series, with complete types, which is convenient for description and selection.