The cable tray roll forming machine is suitable for producing cable trays. Different specifications are completed by changing the die. The roll bending machine has an adjustable combination. A set of rollers can complete all specifications of cable tray products. The specification change is completed by adjusting the gear and roller of the forming machine. Therefore, the type and replacement method of the cable tray roll forming machine, as well as the number of replacements, have a reference role in the design of the roll. Before planning the roll, various factors must be fully considered before making a design plan.
When installing the cable tray roll forming machine, it is usually installed and tightened with screws on the wall board. Therefore, this type of equipment is generally used in equipment that does not require the replacement of rollers when producing special profiles, making it more convenient during production, and designers do not need to consider the requirements for roller replacement.
If it is multi-functional, it is generally used to produce profiles with the same cross-section but different total widths, and is widened in the form of positioning sleeves. The rolls generally do not need to be disassembled and assembled, but the shaft sleeves are used to widen the rolls. . When producing different profiles, another set of roller modules is replaced in combination and fixed with positioning pins. This method is particularly convenient when the production of different profiles needs to be frequently replaced. The replacement time is very fast, and there is no need to move the rollers or readjust them.