As an important equipment in industrial production, the correct use and maintenance of the door frame rolling molding machine is crucial to ensure the product quality and prolong the life of the machine. Here are some precautions when using a door frame rolling molding machine:
Before starting up, make sure that there is no debris around the machine, and check whether the voltage, oil level and lubrication system are normal. If there is any abnormality, it must be handled immediately.
Strictly follow the machine operation process, and operate according to the given parameters to avoid overload operation. At the same time, ensure that the mold and roller are intact and clean, to prevent failure in the production process.
Wear appropriate work clothes and wear protective glasses during the operation. Do not place hand or foreign body between molds for accidental injury. If any abnormal situation is found, stop it immediately for inspection.
Lubricate and maintain the machine regularly, especially for the roller wheels and guide rails. Keep the machine clean and prevent rust.
Check the fasteners regularly to ensure that they are not loose. Replace the worn or damaged parts, if required.
Keep the machine in a dry, dust-free environment to avoid direct sunlight. When not in use for a long time, it should be regularly powered up to ensure the normal life of the battery.
To sum up, the correct use of the door frame rolling molding machine and pay attention to the above matters can not only improve the production efficiency, but also effectively extend the service life of the machine and reduce the maintenance cost.