Sheet rolling forming machine is a common plastic processing equipment widely used in the forming and processing of various types of sheets. The following is its operation process:
1. Preparation: Check if the rolling forming machine is in good working condition, and ensure that the power supply and various components are connected properly. Prepare the required sheets and molds and ensure that they are clean and free of impurities.
2. Insert the sheet: Place the prepared sheet flat into the mold, ensuring that it fits snugly without bubbles or wrinkles.
3. Close the mold: Close the mold to ensure that the sheet is tightly fixed inside the mold.
4. Set parameters: Set the temperature, pressure, and time parameters of the rolling forming machine according to the required forming requirements. These parameters will affect the quality and performance of the finished product.
5. Start the machine: After confirming that all settings are correct, start the rolling forming machine. The machine will roll and shape the sheet according to the set parameters.
6. Take out the finished product: After the molding process is completed, open the mold and take out the formed sheet. At this point, the appearance and dimensions of the finished product should be checked to ensure they meet the requirements.
7. Cleaning the machine: To ensure its performance and extend its service life, necessary cleaning and maintenance should be carried out after each use.
8. Recording and archiving: For important molding processes, it is recommended to record the operating process, parameters used, and any issues that may arise for future reference and improvement.
Strictly follow safety regulations during operation to avoid safety accidents caused by improper operation.