As an important equipment in industrial production, the normal operation of the machine is crucial to ensure production efficiency and product quality. Therefore, it is the responsibility of every operator to maintain the machine regularly.
First of all, daily maintenance is indispensable. After the end of each day, the machine should be cleaned to remove residues and keep the equipment clean. Check whether each component has abnormal sound or loose, and handle it in time. The lubrication system should be checked regularly to ensure that the oil quantity is sufficient and free of impurities.
Secondly, conduct regular deep maintenance. Key components shall be disassembled quarterly or semi-annually depending on the frequency and wear of the machine. For example, bearings, gears and chains, etc. should be replaced or lubricated regularly to ensure their normal operation. In addition, the electrical system should also be checked regularly to prevent accidents caused by aging.
Finally, we should pay attention to the storage environment of the machine. The arch shoulder plate roller forming machine not used for a long time should be stored in a dry, dust-free place to avoid the sun and rain. During the storage period, it should be checked regularly to avoid the damage caused by the idle machine for a long time.
Through the above measures, it can effectively extend the service life of the rolling forming machine, improve the stability of the equipment and reduce the failure rate. It not only guarantees the continuity of production, but also saves the maintenance cost for enterprises. The operator shall strictly follow the maintenance procedures to ensure that the machine is in the best condition.