The adjustment of steel roof cap roller is necessary to ensure the normal operation of equipment and product quality. The following is the detailed adjustment process:
1. Preparation: First, check whether the parts of the rolling forming machine are in good condition to ensure that the power supply and hydraulic system are normal. Prepare the required tools and measuring instruments, such as screwdrivers, wrenches, calipers, etc.
2. Adjust the rack level: use the level instrument to detect the level and verticality of the rack. If necessary, adjust the rack with gaskets to ensure that the whole rack is on the same horizontal plane.
3. Calibrate the roll position: calibrate the roll position by adjusting the motor eccentric wheel and the feeding rod to ensure the consistent roller spacing. At the same time, check the axial movement of the roll to ensure its stability.
4. Adjust the pressure: According to the production demand, adjust the pressure of the hydraulic system to ensure that the pressure is stable and meets the requirements during the rolling and forming process.
5. Test operation: after the adjustment, conduct trial operation to observe the operation status and product quality of the rolling molding machine. If there is anything, adjust in time.
6. Record and maintenance: Record the parameters of each adjustment and the corresponding production batch in detail for subsequent analysis and maintenance. Maintain the equipment regularly to ensure its long-term and stable operation.
In addition, operators need to be trained before working to avoid equipment damage or safety accidents caused by misoperation.
To sum up, although the adjustment of steel roof cap roller forming machine is relatively complicated, as long as the above steps, can ensure the good operation of the equipment and product quality.