Closed floor coil forming machine is an efficient and automated production equipment for the production of various specifications of floor coil. The following is how the machine works:
1. Preparation stage: First, check whether the parts of the equipment are in good condition to ensure that the external conditions such as power supply and air pressure are normal. Prepare floor coil raw materials to be produced and place them in designated locations.
2. Start the equipment: turn on the power switch and start the closed floor coil forming machine. Observe the equipment operation status to ensure that everything is normal.
3. Set parameters: set the width, thickness, length and other parameters of the coil according to the production requirements. These parameters will determine the final product specifications.
4. Feed: feed the prepared raw materials into the feed port of the molding machine through the conveyor belt. Ensure that the raw materials are flat and wrinkle-free.
5. Forming: in the molding area, raw materials through hot pressing, cooling and other processes, gradually form the required floor coil. At this time, we should pay close attention to the formation of the coil material to ensure the quality.
6. Rolling and cutting: the formed coil passes through the winding device to form the coil. According to the set length, the cutting device cuts the coil into the specified length segment.
7. Cutting and inspection: the cut floor coil is sent out through the feeding device, and the operator conducts quality inspection. Qualified products will be stacked neatly and waiting for subsequent processing.
8. Cleaning and maintenance: After production, clean the equipment, check the wear of all parts, and carry out necessary maintenance.
Through the above process, the closed floor coil forming machine can efficiently and accurately produce the floor coil that meets the requirements.