Highway guardrail rolling forming machine is specially used for the production of highway guardrail equipment, its use and attention are as follows:
Before operation, ensure that all parts of the rolling forming machine are running normally, and check for any impurities, workpieces and tools. To ensure safety, operators shall be equipped with necessary protective equipment such as safety helmet, protective glasses, earplugs and protective gloves.
Precautions include: make sure your hands are dry and avoid wearing loose clothes or hanging items to avoid being pulled in by the machine. Adjust the working parameters of the rolling forming machine to meet the process requirements, such as the height of the workbench and the pressure of the roller. During the operation, it is strictly prohibited to contact the roller or workpiece of the rolling forming machine by hand. Special tools should be used. Because the rolling molding machine will produce large noise and vibration, operators should wear earplugs and wrist pads.
After the work, be sure to turn off the power supply of the rolling forming machine in time, clean up the sundries on the working table and the roller, and keep the machine clean and tidy. Unauthorized personnel are strictly prohibited to operate the rolling forming machine to avoid accidents.
In addition, the operator of the rolling forming machine should be familiar with the operation process, and clearly know the necessary steps for each work. The rolling machine tool shall be maintained and tested regularly to ensure its safe and stable operation.
In short, the use of highway guardrail rolling molding machine, must strictly follow the operating procedures, to ensure the safety of personnel and equipment, and to ensure the quality of the highway guardrail produced by the reliable.