751
The forming machine is a kind of machine and equipment used to manufacture products of various shapes and sizes. Although its use method may vary according to the specific model and specifications, but generally follow certain steps.
First, select the suitable countertop to ensure that the machine is stable and easy to observe the operating panel. Next, plug the power plug into the power socket, and turn on the power switch, and wait for the machine to warm up or self-test, to ensure the normal operation of all systems.
Then, according to the product requirements, select the appropriate mold and be installed on the forming machine. During the installation process, attention should be paid to the positioning and fixation of the mold to ensure its stability and reliability.
Then, adjust the working parameters of the forming machine, such as temperature, pressure, speed, etc. The setting of these parameters is essential for product quality and therefore needs to be precisely adjusted according to the product characteristics and process requirements.
After the machine is ready, put the raw material into the feed inlet of the forming machine, and adjust the feed speed and quantity to ensure a uniform feed supply. At this point, you can start the machine to start production.
During the forming process, the operator should pay close attention to the running state of the machine and the product forming situation, and find and deal with the possible problems in time. For example, check whether the mold is wear or loose, whether the product is defective or defective, etc.
When production is completed, turn off the forming power switch and perform necessary cleaning and maintenance work. This helps to keep the machine in good condition and extend its service life.
In general, the use method of the forming machine needs to follow certain steps and precautions to ensure the normal operation of the machine and the stability of the product quality. During the use process, the operators should strictly follow the operating procedures to avoid the problems caused by the operation error or improper use.