1281 What is the use method of the forming roller forming machine - China Roll Forming Machine, Steel Water Tank Machine, Steel Silo Rollformer, Suppliers, Manufacturers, Factory - J&R
news

What is the use method of the forming roller forming machine

2024-06-24

The use method of forming roller forming machine mainly includes the following steps:

1. Preparation stage: First, make sure that the forming roller forming machine is installed in a dry indoor environment without dust, flammable and explosive chemical agents and other substances that have corrosive effect on the machine, and the temperature is suitable. Before starting up, check whether the lubrication of each part is good, fill the lubricating oil according to the regulations, and confirm whether the rotating and moving parts are flexible, whether the connection of the machine is fastened, and whether the electronic control parts are normal.

2. Adjustment and feeding: according to the product requirements, select the corresponding mold and install it on the molding machine. Then, the raw materials to be processed are put into the syringe and accurately weighed to ensure the quality.

3. Operation process: start the electronic control system of the molding machine and control the syringe to inject the raw materials into the mold. At the end of the ejection, open the cooling system to cool the mold. After the cooling is complete, remove the finished product from the mold.

4. Cleaning and maintenance: After each processing, it is necessary to clean the mold and syringe to prepare for the next processing. In addition, the cleanliness of the machine and the mold, and the supply of lubricating oil and water should be checked before starting up every day.

5. Safe operation: When operating the forming machine, you must strictly abide by the operating rules and wear the safety protection equipment. Do not reach inward or reach into other objects when the machine rotates to prevent injury. At the same time, avoid unauthorized adjustment of equipment parameters and operation procedures.

To sum up, the use method of the forming roller forming machine involves preparation, adjustment, operation, cleaning and maintenance, to ensure the normal operation of the machine and product quality, but also need to pay attention to the operation safety.