The operation process of the trench forming machine mainly includes the following steps:
1. Preliminary preparation:
Confirm the construction site and working scope, and understand the geological conditions and environmental characteristics.
Check the working condition of the trench machine equipment to ensure the normal operation of the equipment.
Check all tools and accessories for integrity and availability.
Provide the necessary personal protective equipment, such as safety helmet, protective glasses, earplugs, protective gloves, etc.
Confirm the safety of the construction area and ensure that there are no personnel and obstacles.
2. Installation and adjustment:
Cut off the power supply and lock the switch to ensure that the device is stopped.
Install the cutting tool and the blade head to ensure that the blade opening is sharp and fixed.
Adjust the working depth and width of the trench machine according to the construction requirements.
3. Startup and operation:
Start the power supply and start the trench machine as required in the equipment specification.
The movement and depth of the trench machine are controlled by the buttons and handles on the console.
Start the trenches in the marked construction area and operate section by step as required.
4. Monitoring and maintenance:
Keep focus during the working process of the trench machine and pay close attention to the operation of the equipment.
Check the sound of the motor and reducer regularly to ensure the normal operation of the lubrication and cooling system.
Keep the trench machine and cutting tool clean and operate properly.
5. Finish the work with you:
Power off and lock the switch to finish the operation.
Clean up the site and prepare for the next phase of the work.
Following the above procedures can ensure the safe and efficient operation of the trench forming machine.