401
The working principle of the steel silo forming machine mainly covers the following steps:
1. Material preparation: First of all, the coil that meets the requirements of the silo design drawings is accurately cut and pretreated to ensure that it meets the forming requirements. These panels are hoisted to the rolling machine through the triangle bracket and inverted chain to prepare for the subsequent forming work.
2. Form and processing: The rolling plate is then sent to the forming machine for rolling. Through the action of its internal roller and molding roller, the molding machine bends the coil plate into a spiral shape and gradually reduces its diameter until it reaches the required size of the equipment. In this process, the upper and lower shapes of the bending plate along the coil just form a group of grooves that can be combined with each other, and the section is in the upper case "S" shape.
3. Roll processing: the forming the board needs to be further processed by the rolling machine. The coil rolls the upper side of the coil into convex ribs to enhance its structural strength.
4. Assembly and detection: the coil plate treated with the rolling edge becomes the warehouse wall and is supported on the running wheel of the running bracket. As the spiral of the warehouse wall rises, the steel bracket below the cushion is also gradually raised. After the beginning and tail of the warehouse wall are connected, after strict testing to ensure that the plane diameter is correct, the subsequent bite and closing work can be carried out.
To sum up, the steel silo forming machine realizes the efficient and accurate manufacturing of the steel silo through precise material preparation, forming processing, curling processing and assembly testing.