A corrugated cylinder machine is a device used to filter a liquid or gas. It increases the filtration area and improves the filtration efficiency through the corrugated cylinder. When using corrugated cylinder machines, the following shall be followed to ensure normal operation of the equipment and extend service life:
1. Check the equipment: before use, carefully check the integrity of the corrugated cylinder machine, including whether the cylinder, seals and connecting parts are intact, to ensure that there are no cracks, deformation or other damage.
2. Clean the filter medium: ensure that the filter medium (such as the filter screen, the filter cloth, etc.) is clean and not damaged, so as to avoid blocking or affecting the filtration effect.
3. Correct installation: correctly install the corrugated cylinder machine according to the equipment instructions to ensure that all parts are closely connected and without leakage.
4. Check before starting: Before starting the equipment, check whether all the valves are in the correct position to ensure that the system pressure meets the requirements.
5. Control flow: During the starting process, the feed valve should be opened slowly to avoid damage to the filter medium or equipment due to excessive flow.
6. Monitoring operation: During the filtering process, the operating status of the equipment, including pressure, flow and temperature, to ensure that they are within the safe range.
7. Periodic maintenance: regularly clean and maintain corrugated cylinder machines, including replacing filtration medium, cleaning blockage and checking seals, etc.
8. Emergency measures: formulate emergency measures. Once an abnormal situation is found, such as high pressure or leakage, the equipment operation should be immediately stopped, and dealt with in accordance with the plan.
9. Obey operating procedures: strictly abide by operating procedures and safety guidelines to avoid equipment damage or personal injury caused by improper operation.
10. Training operators: ensure that operators receive appropriate training to understand the correct use of corrugated cylinder machines and safety precautions.
Following the above matters can ensure the efficient and safe operation of corrugated cylinder machines and extend the service life of the equipment.