Door frame rolling forming machine is a mechanical equipment used for the production of metal door frame, and its operation process mainly includes the following steps:
First, the operator needs to select the appropriate mold and install it on the machine according to the production requirements. The selection of the mold depends on the size and shape of the door frame. When installing the mold, ensure that the mold is firmly fixed to avoid displacement during the production process.
Secondly, place the prepared metal material at the feed inlet of the machine. The metal material is usually a metal strip such as aluminum or steel, and the length and width shall meet the manufacturing specifications. When placing the material, ensure that the material is flat and has no obvious bending or folding.
Next, start the machine and warm it up. Preheating is to ensure that all the parts of the machine reach the working temperature and ensure that the material can be smoothly shaped during the rolling molding process. The preheating time depends on the machine type and the type of material.
After preheating, the operator needs to adjust the parameters of the machine, such as rolling speed, pressure, etc., to meet the production requirements of different materials and door frame specifications. When adjusting the parameters, follow the instructions of the equipment operation manual to ensure that the parameters are set correctly.
Then, the operator initiates the rolling molding procedure. After the machine starts working, the metal material passes through the rolling wheel and gradually forms into the desired door frame shape. During the molding process, the operator needs to closely monitor the running state of the machine to ensure that the molding process proceeds smoothly.
Finally, the formed door frame will automatically or manually output from the discharge port of the machine. The operator needs to check the quality of the door frame to ensure that the size is accurate without obvious defects. If there are unqualified products, adjust the machine parameters or replace the mold in time to improve the production quality.
After completing the above steps, the operation process of the door frame rolling molding machine is over. Safe operation and quality control are crucial throughout the operation process, and the operators should strictly follow the operating procedures to ensure the production efficiency and product quality.