The workflow of the trapezoidal roof rolling forming machine is mainly divided into the following steps:
First, the preparation phase. The operator needs to check whether the rolling forming machine is in good working condition, including checking whether the parts are fastened, whether the lubrication is sufficient, whether the electrical system is normal, etc. At the same time, prepare the required raw materials, such as metal sheet metal, and ensure that they meet the production requirements.
Next, there is the rolling molding stage. The prepared metal plate is sent into the feed inlet of the rolling forming machine, and the machine will automatically send the plate into the rolling area. During the rolling process, the machine will continuously roll and shape the plate according to the preset procedures and molds, and gradually deform it into the shape needed for the trapezoidal roof.
During the rolling forming process, the operator needs to pay close attention to the operation of the machine to ensure the coordination of all components to avoid failure or abnormal conditions. At the same time, the parameters and molds of the machine should be adjusted according to the production requirements to ensure that the size and shape of the finished product meet the requirements.
When the rolling molding is completed, the machine will automatically deliver the finished product from the outlet. At this point, the operator needs to check the finished product to confirm whether the size, shape and surface quality meet the requirements. If there are unqualified products, they need to be processed and adjusted in time.
Finally, there is the cleaning and maintenance phase. After completing the production task, the operator needs to clean and maintain the rolling molding machine, including cleaning the debris and waste materials inside the machine, checking the wear of each part, and replenishing the lubricating oil, etc. This ensures that the machine can maintain good operation and performance for the next use.
Above is the workflow of the trapezoidal roof rolling molding machine.