421 Use method of roof panel and wall board roller press - China Roll Forming Machine, Steel Water Tank Machine, Steel Silo Rollformer, Suppliers, Manufacturers, Factory - J&R
news

Use method of roof panel and wall board roller press

2024-11-01

The use method of roof panel and wall board roller press mainly includes the following steps:

First, ensure that the roller press and its related equipment are in good condition for necessary inspection and lubrication. Check whether the equipment fasteners are firm, whether the electrical system is normal, and whether the rollers are damaged.

Secondly, adjust the roller clearance according to the production demand, to adapt to the different thickness and material of the roof panel and wall panels. The adjustment should be made slowly and evenly to avoid causing damage to the equipment.

Then, open the roller press, gradually feed the material, pay attention to control the feeding speed, to ensure the smooth delivery of materials. When the material is pressed through the roller, the forming quality of the plate should be closely observed, and any abnormal material should be adjusted in time.

During the pressing process, the roller should be kept clean to avoid the pressing effect affected by the attachments. At the same time, monitor the operating temperature of the equipment to ensure that it is within the normal operating range.

Finally, after the pressing is completed, the finished product is quality checked to ensure that the dimensional accuracy and surface quality meet the standards. Subsequently, the finished products shall be properly stacked to prevent deformation or damage.

Throughout the operation process, the operators should strictly follow the safety procedures to ensure the safety of individuals and others. Regular maintenance and maintenance of equipment to extend the service life of equipment and ensure production efficiency.