When operating the trapezoidal roof roller forming machine, first ensure that the equipment is in good condition, and check whether the power supply, lubrication system and safety protection device are normal. Before operation, read the equipment instructions in detail to understand the structure and function of each part.
The operation steps are performed as follows:
Preparation: clean the equipment bench, ensure no sundries, adjust the mold to the appropriate position, and adjust the roller clearance according to the production requirements.
Material preparation: Select metal sheet of appropriate thickness and material and cut to the required size according to the production drawings.
Start the equipment: turn on the power supply, check whether the equipment is running normally, and place the material at the feed port after confirmation.
Molding process: slowly push the material forward, ensure that the material fits closely to the mold, observe the forming quality, and adjust the roller clearance when necessary.
Quality inspection: check the molding products at any time to ensure that the size and shape meet the requirements, and adjust the equipment in time.
Safe operation: During the operation, it is strictly prohibited to put your hands into the equipment to ensure that the safety protection device is in the working state.
Downtime maintenance: after completing the production task, turn off the power supply, clean the workbench, and carry out routine maintenance of the equipment, including lubrication and cleaning.
During the operation process, strictly observe the safe operation procedures to ensure the smooth production. In case of equipment failure, stop down immediately and report. Do not run with disease. Repair the equipment regularly to ensure the stable equipment performance.