151
The method of using the ibr roofing roll forming machine mainly includes the following steps:
1. Equipment preparation: Make sure that the ibr roofing roll forming machine is installed firmly, turn on the power, and preheat the equipment.
2. Material placement: Place the roll at the feed port of the machine, adjust the position of the roll, and ensure that it is aligned with the feed guide of the machine.
3. Adjust parameters: Adjust the machine's forming width, thickness and other parameters according to the specifications of the required product.
4. Turn on the equipment: Start the ibr roofing roll forming machine, observe the operation of the roll, and ensure that it passes through the forming device smoothly.
5. Forming process: The machine heats the roll to a certain temperature and presses the roll into the required shape through pressure.
6. Cooling and curing: The formed roll passes through the cooling and curing zone to ensure that its shape is fixed.
7. Material collection: Collect the formed rolls, pay attention to check the product quality, and ensure that there are no defects.
8. Clean the equipment: After use, turn off the power, clean the residual material on the machine, and keep the equipment clean.
9. Troubleshooting: If a fault occurs during use, the machine should be stopped immediately for inspection and continued to be used after the fault is eliminated.
The correct use of the ibr roofing roll forming machine can improve production efficiency and ensure product quality. Operators must be proficient in the use of the equipment and strictly abide by safety regulations during operation.