Automatic rolling molding machine is a widely used in metal and non-metal sheet metal processing equipment, mainly used for the production of various shapes of profiles. The following is how the device operates:
Preparation: ensure that all parts of the rolling forming machine are clean and free of sundries, and check whether the power supply, hydraulic system and control system are normal.
Install the mold: select the appropriate mold according to the production requirements, install the mold on the rolling molding machine, and adjust the mold position to align it with the machine axis.
Adjust parameters: Set the rolling speed, pressure and other parameters according to the plate material, thickness and profile size.
Start up: turn on the power supply, start the rolling forming machine, observe whether the equipment operation is stable, and immediately stop for inspection.
Place the plate: place the plate to be processed at the feed inlet of the rolling molding machine to ensure that the plate is in good contact with the mold.
Start rolling: start the rolling forming machine to roll the plate through the mold. Pay attention to observe the operation of the plate in the mold, adjust the speed and pressure to ensure the molding effect.
Adjust the molding Angle: according to the profile requirements, adjust the molding Angle of the rolling molding machine, so that the profile reaches the expected shape and size.
Check the finished product: during the rolling process, check the size and shape of the profiles regularly, and adjust the equipment parameters in time if there are unqualified products.
Close the equipment: after the production, turn off the power supply of the rolling forming machine, clean the site, and maintain the equipment.
Safety production: in the whole operation process, strictly observe the safety production regulations, to ensure the safety of operators and equipment.