Application of cable bridge rolling forming machine
Cable bridge rolling molding machine is a common equipment in the electric power industry, and its application matters are crucial to ensure the production efficiency and operation safety. The following are some of the key applications of the cable bridge rolling forming machine:
1. Preparation before the operation
Before operating the cable bridge rolling forming machine, carefully check whether the power supply, gas source and hydraulic oil of the equipment are normal to ensure that all parts are intact and are firmly installed. At the same time, operators should wear safety shoes, gloves, goggles and other labor protection equipment to ensure personal safety.
2. Familiar with the operation procedures
Operators should be familiar with the operation process and safety procedures of the cable bridge rolling forming machine, and strictly prohibit the untrained personnel to operate the equipment. During the operation, pay close attention to the running state of the equipment. If any abnormality is found, stop the machine immediately for inspection to avoid fault expansion.
3. Pay attention to production safety
During the operation of the equipment, it is strictly prohibited to extend the hands, head, body and other parts into the equipment to avoid danger. At the same time, the passage around the equipment should be kept unblocked for evacuation in emergency situations.
4. Equipment maintenance
Maintain the cable bridge rolling forming machine regularly to keep the equipment in good condition. Replace the vulnerable parts in time to ensure the normal operation of the equipment. At the same time, attention should be paid to the noise and vibration of the equipment, as well as the temperature and hydraulic oil pressure, if any abnormal should be handled in time.
5. Adjust the mold properly
Cable bridge rolling molding machine can produce different specifications of cable bridge by replacing the mold. When replacing the mold, the power supply should be cut off and wait for the equipment to stop running before operation to ensure the safety of operation.
To sum up, the application of cable bridge rolling molding machine involves pre-operation preparation, operation process, production safety, equipment maintenance, mold adjustment and other aspects. Only by strictly complying with these matters, can we ensure production efficiency and operation safety.