Steel silo rolling forming machine is an efficient and accurate forming equipment. In order to ensure its safe and stable operation and produce high quality steel silo, the following are some key operation matters:
1. Preparation before the operation
1. Ensure that the operators are familiar with the structure, performance and safety operation procedures of the rolling forming machine.
2. Check whether all parts of the equipment are in good condition, and whether the transmission mechanism, lubrication system and electrical system are normal.
3. Clean the working area to ensure no debris interference operation.
4. Prepare the corresponding molds and raw materials according to the production requirements.
2. operating process
1. Start the equipment and check whether it is running normally. Stop it immediately.
2. Install the mold to ensure that the mold is concentric with the roller, and adjust the mold position according to the size of the steel silo.
3. Send the raw materials into the rolling forming machine, start the rolling wheel, so that the raw materials gradually form into steel silos.
4. During the rolling process, pay attention to observe the molding situation, and adjust the roller pressure and speed in time.
5. When the steel silo reaches the required length, stop down and take out the finished product.
3. Safety precautions
1. During the operation, it is strictly prohibited to put your hand or other items into the roller wheel to prevent injury.
2. Operators should wear protective equipment, such as safety hats, protective glasses, work clothes, etc.
3. Maintenance and cleaning of the equipment are strictly prohibited.
4. If the equipment is abnormal or faulty, it shall be shut down immediately and reported to relevant personnel for handling.
4. tending
Regular maintenance and maintenance of equipment, including inspection of wear of all parts, replacement of lubricating oil, cleaning equipment, to ensure long-term stable operation of equipment.