The operation mode of the double-layer roller press is mainly based on its structural characteristics and production requirements. The following is a brief introduction of the operation mode of the double-layer roller press:
Before operation, ensure that the power supply and gas source are connected, check whether the lubricating oil in each part is sufficient, clean the working area, and wear personal protective equipment. Before starting the double roller press, preheating, usually for 10-15 minutes. After preheating, adjust the speed and pressure of the roller press according to the production requirements.
During operation, put the material to be processed at the inlet of the double-layer roller press, pay attention to the position and size of the material, and ensure that the material does not exceed the maximum processing capacity of the roller press. Use the control device to control the feeding speed of the roller, adjust the position and Angle of the material to ensure that the material passes through the roller smoothly. At the same time, it is necessary to monitor the running state of the roller press, pay attention to the indication of the pressure gauge and temperature gauge, and any abnormal situation should be handled in time.
In the process, it is strictly prohibited to touch the roller and roller to avoid danger. If it is necessary to adjust the roller seam, it should be done after shutdown to avoid adjustment during equipment operation and cause equipment damage or safety accidents.
After processing, turn off the power switch and stop the operation of the roller press. Clean up the working area, store the unused materials properly, and clean up the residues and debris of the roller press. Check whether all parts of the roller press are normal, if there is abnormal, repair and maintenance in time.
In addition, the operators should operate in strict accordance with the operating procedures, and shall not adjust the parameters and equipment of the roller press without authorization. During the operation, pay attention and follow the safety regulations to ensure the safety of yourself and others. At the same time, the roller press should be maintained regularly to extend the service life of the equipment and improve the production efficiency.