The operation process of rolling curtain rolling machine is a detailed and rigorous task. The following are the main steps:
Before operation, ensure that the rolling machine is in good working condition and check whether the parts are intact, especially the key parts such as winding device, tensioning device and cutting device. Operators should wear safety equipment, such as gloves and goggles, to ensure personal safety.
Before starting the machine, place the raw materials on the feeding device as required, and adjust the tension of the tensioning device to ensure that the materials are neither loose nor overstretched during the winding process. According to the characteristics and processing requirements of the material, adjust the feeding speed reasonably, so that the material can smoothly and continuously enter the winding area.
In the process of rolling, it is necessary to closely monitor the running state of the rolling rolling machine, observe whether the material is taken uniformly, and whether the edge is flat. If any abnormality is found, such as material deviation, not close and other problems, should be immediately stopped for adjustment. At the same time, according to the processing requirements, timely adjust the cutting length of the cutting device, to ensure that the processed products meet the specification requirements.
After the operation, turn off the power supply of the rolling shutter and wait for the machine to completely stop operation before cleaning and maintenance. Clean the residues inside the machine, lubricate key components, check and tighten loose screws to extend the service life of the equipment.
In addition, it is also necessary to pay attention to the daily maintenance and maintenance of the rolling rolling machine, regularly check the wear of each part, and replace the damaged parts in time to ensure the stable operation of the equipment. During the operation process, we should always be vigilant, strictly abide by the operating procedures, to ensure personal safety and product quality.