The upper and lower rolls or leveling wheels of cold-formed steel equipment should be properly operated and maintained, otherwise there will be problems in the whole process of application. For example, dragging the motion trajectory will cause blurred motion trajectory deformation and asymmetrical forces, thereby reducing its useful life. If bending and deformation occur during the processing, the key reason is the imbalance of the ground stress, so the ground stress should be balanced in the design process to facilitate accurate solutions.
The reliability of cold rolling working pressure should be considered in the whole process of cold rolling of cold-formed steel. If chemical substances are on the track, certain effective measures should be taken accordingly. For example, when assembling, the gap between each area of the wheel is the same. You can set your tendencies before the raw material gets bitten.
In the whole process of lubricating and grinding the cooling roller, the friction between the roller and the nylon conveyor belt surface must be generated. Drum lubricants are generally divided into non-aqueous lubricants and water-soluble lubricants.
Water-soluble moisturizing lotion is widely used in thin and thick oil slick sealing, excellent lubricity and rust resistance. However, care should be taken to avoid the lubricant being left on the surface of the model during partial erosion and storage. Although the lubricating performance of the melted organic chemical lubricant is slightly poor, its outline and equipment environmental pollution is low, and it can maintain a green manufacturing environment.