Cold-formed steel is required in the transportation industry, automobile manufacturing industry and electric power industry. The production process of this steel is relatively special, and the production material has high strength, which can achieve better use effect after production and installation. The properties of steel are stable and reliable, and are not easily affected by the external environment, so the application of cold-formed steel is becoming more and more common. In order to ensure the application quality of cold-formed steel, it is necessary to complete the production process through professional cold-formed manufacturing equipment. Therefore, the application of cold-formed mechanical equipment units is very common in related processing industries. This equipment is designed according to the production requirements of cold-formed steel. R & D process, so it is more in line with the purchase requirements of the modern processing industry. So what are the common problems that need to be understood during the application and installation of cold-formed mechanical equipment units? During the processing of materials with cold bending equipment, it is necessary to pay attention to selecting suitable materials according to the process requirements of cold bending manufacturing, so the processing must be completed by professionals, and the operators of cold bending equipment need to understand the equipment. Operation method and working principle, so that the processing flow can be completed in combination with specific requirements.
During the processing of the material, it is also necessary to understand the stress requirements of the material, because the stress requirements of the material also directly determine the selection of the process method. Some processing enterprises will encounter such and other problems during the use of cold bending equipment. When the material processing is completed, it will be found that the camber of the material exceeds the expected standard. At this time, the material cannot be put into use, so some processing operations are carried out. Before, the staff also needed to pre-process the material according to the specific situation, so that the production quality of the material can be ensured when processing through the equipment, and the staff need to be flexible about the operation skills.