Before using the cold bending machine, check in advance whether the circuit of the cold bending machine and the hydraulic oil of the body are abnormal. The processing site of the cold bending machine must have enough steel turnover space, and the operators who operate the cold bending machine must undergo pre-job training. Fully understand the structure and working principle of the cold bending machine, operate in strict accordance with the operating procedures, and make a good record of the maintenance and use of the cold bending machine.
Special personnel regularly and at fixed points to lubricate the cold bending machine. After the cold bending operation is completed, it must be kept clean. The parts with severe wear should be replaced in time, and the maintenance personnel should be regularly maintained and maintained. Note that the hydraulic oil should not be lower than the liquid level of the hydraulic oil window. The rollers and roller bearings should be filled with butter in time, and the pressure rollers should be used in time. cleaning. Always apply anti-rust oil on the sliding side to prevent the cold bender from rusting.