The first is the selection of the key components of the cold forming machine, that is, the roll, and its material must have good wear resistance, hardness and strength. The second is to ensure the stability of the operation of the cold forming machine. Since the material will swing in the raceway during processing, the direction of the swing can be controlled according to the actual force.
Another key point is the working accuracy of the roller processing in the cold forming machine; not only that, the roller taper bearing should be selected in the main drive of the equipment, and the radial runout of the main shaft should be within 0.04MM to avoid the occurrence of channeling. verb: move. At the same time, the use and repair of the cold forming machine is of great significance and value to the equipment, which needs to be taken seriously by the manufacturer. The equipment inspection of the cold forming machine is a planned preventive inspection. In addition to the human senses, the inspection method also requires relevant inspection tools and instruments. The equipment inspection should be carried out according to the inspection plan. The contents of the cold forming machine inspection include the measurement and verification of the operation of the equipment, working accuracy, functional characteristics, and degree of wear or corrosion. Through inspection, we can fully grasp the technical status and wear of the cold forming machine, identify and eliminate hidden dangers, and purposefully make preparations before repair to improve repair quality and shorten repair time. Equipment inspection is divided into daily inspection and regular inspection. .
Cold forming machine repair refers to repairing equipment damage and precision deterioration caused by daily or abnormal reasons. By repairing and replacing worn, aged and corroded parts, equipment performance can be restored. The maintenance and repair of the cold forming machine are different aspects of equipment maintenance. The two cannot replace each other due to the difference in work content and function, but should be done separately so as to cooperate and complement each other. Commonly used cold forming machine repair methods are: compulsory repair method; regular repair method; repair method after inspection.
One of the first things to do is to test the various instruments of our cold forming machine. The instrument represents a manifestation of various work data, so it is very important for the whole production whether the instrument of our cold forming machine is kept in normal condition. If it is necessary to adjust various data, then it needs to be done before the start of construction, so that the products we produce will not have problems. The preparation of the cold forming machine also includes checking whether the cold forming machine is running normally and whether there are some strange sounds during operation. When we do these inspections, we can start normal work. Only by doing these can we guarantee that there will not be any failures on the cold forming machine during operation.
The physical examination of the cold forming machine before work is very important. When you want to put the cold forming machine into work, you should first do a comprehensive inspection of its body. Only when sufficient preparations are made can the machine move forward. Through the above introduction, everyone has a certain understanding of the physical examination work before the cold roll forming machine works. The serious medical examination work is the guarantee to ensure that the cold roll forming machine can work normally, so as to ensure the accuracy of the cold roll forming machine.