The maintenance and cleaning of corrugated forming machine is the key to ensure its long-term stable operation and production of high quality bellows. The following are the detailed steps and precautions for the maintenance and cleaning of the corrugated forming machine, and the content is controlled at about 450 words:
1. Daily cleaning
After each use, timely clean up the debris and waste on the console and head of the corrugated forming machine. Avoid the debris in the machine to the equipment during subsequent operation. Use a clean cloth or brush to remove dust and dirt and pay special attention to cleaning the tool and nose parts to ensure there is no residue.
2. Regular inspection and maintenance
Check the working condition of the equipment regularly, and check whether the fasteners of each part are loose, especially at the knife holder and nose. In case of loosening, it shall be tightened immediately to avoid affecting the normal operation of the equipment. At the same time, check the lubrication of the bearing, clean the bearing regularly and replace the appropriate amount of lubricating oil to ensure the normal operation of the equipment.
3. Professional cleaning
Clean the internal and key parts of the equipment regularly. Use special cleaning agent and tools and follow the instructions in the equipment instructions. Pay special attention to cleaning the filter and replace a new filter if necessary to avoid further damage to the equipment caused by impurities and waste materials.
4. safe operation
During the maintenance and cleaning work, the safety operation procedures must be strictly observed. Cut off the power supply to avoid the risk of electric shock. Do not put your hand or other items into the equipment to prevent danger. Use the necessary protective equipment to ensure the safety of the operators.
5. Record and give feedback
After each maintenance cleaning, the cleaning time, cleaning content, problems and solutions should be recorded in detail. In case of abnormality or fault of the equipment, contact the equipment manufacturer or supplier in time to get professional guidance and maintenance services.
Through the above maintenance and cleaning work, it can ensure the stability and reliability of the corrugated forming machine, improve the production efficiency, and extend the service life of the equipment.