When operating a metal roof forming machine, a series of operational matters must be followed to ensure safe and efficient production.
First, ensure that the equipment is in good working condition before operation. This includes checking whether the power supply, air pressure and other systems are normal, and cleaning the working table, mold, etc., to ensure that no debris interferes with the molding process. At the same time, check the quality and specifications of raw materials to ensure that they match the production requirements.
In terms of mold selection and installation, it is necessary to select the appropriate mold and install correctly according to the shape and size of the roof. After the installation, the mold also needs to be adjusted and calibrated to ensure the molding accuracy.
Then, load and locate the raw materials. Place raw materials on the work table and fix them with fixture aids to prevent movement or deformation during the molding process.
In terms of setting the molding parameters, the parameters such as the molding speed, molding pressure and temperature should be reasonably adjusted according to the type and thickness of the raw materials and the characteristics of the mold. Accurate setting of these parameters is critical to the quality of the molding.
After starting the equipment, please closely observe the molding process. If abnormal conditions are found, such as mold damage, raw material lag, etc., should be immediately stopped and troubleshooting. At the same time, regular sampling inspection of the molding products, to ensure that they meet the quality standards.
Finally, the equipment should be cleaned and maintained after completing the operation. Clean the work table, mold and other parts, remove the residual metal debris, oil, etc. At the same time, check the wear and tear of the equipment, replace the damaged parts in time, to ensure the long-term stable operation of the equipment.