Light steel structure installation machinery for color steel tile equipment The components of light steel structure are relatively light in weight and the installation height is not large. Therefore, the hoisting machinery selected for component installation are mostly self-propelled (crawler) cranes and tower cranes with flexible walking. Mainly, the length of the boom of the selected tower crane should have enough coverage and enough lifting capacity to meet the lifting requirements of components in different parts. An entire z-transport space that can not collide. For some small components with relatively light weight, such as sandalwood strips, color steel plates, etc., they can also be directly hoisted and installed by manpower. The number of cranes can be reasonably determined according to the project scale, installation project size and construction period requirements.
Color steel tile equipment must pay attention to the safety of electricity:
1. The electrical equipment should be inspected and maintained on schedule according to the regulations, and the unused electrical equipment lines should be removed at the bottom.
2. Departmental power outage work, when the nearby electric body is less than 0.9 meters away from the inspector, dry wood rubber or insulating material must be used as a reliable temporary shield.
3. When using electric tools, there is protection against electric shock.
4. When using the ladder, the angle between the ladder and the scene should be 60 degrees. When using the ladder on the concrete scene, there should be f-slip measures, and someone should support the ladder.
5. When it is found that any conductive part of the color steel tile equipment is grounded, before the power supply is not cut off, except for the rescue of the electric shock, it is not allowed to approach, and it is 4 meters away from the vicinity and 1.8 meters away from the room to avoid step voltage damage.
6. Electricians must know the types and functions of electrical circuits and electrical equipment in the workshop, and do not fully understand the functions of electrical equipment. Risky homework is prohibited.
7. Electricians should check the conditions of cables, motors, electric consoles and other equipment on a daily basis. Problems found during the inspection must be dealt with in time. When checking the motor temperature, first check that there is no electricity, and then test with the back of your hand.
8. Except for temporary construction electricity or temporary measures, it is not allowed to set up temporary wires, hang lights indiscriminately, and use safe switches and sockets such as instrumentation tools and electric welding machines.