Precautions for Proper Use of Metal Roll Forming Machine
2023-05-30
1. Regularly observe the height of the lubricating oil inside the sliding box and both sides of the machine body.
2. It is strictly prohibited to work beyond the small closing height, that is, a small distance of 290mm from the bottom surface of the upper sliding box to each working surface. The height after the upper and lower molds are closed should be added, and the thickness of the upper and lower base plates plus the thickness of the tile blank should not exceed 290mm. When manufacturing molds, this requirement should be strictly followed for design to avoid machine tool accidents. Regularly observe the height of the lubricating oil inside the sliding box and both sides of the machine body.
3. The metal roller forming machine should be regularly wiped and kept clean, without mud or water accumulation.The C-shaped steel products rolled by the metal rolling forming machine have good tensile, bending, and pressing properties, good flatness, fully automatic length cutting, automatic punching, high automation, fast and convenient installation. The products can be used as the main load-bearing structure of large and medium-sized industrial and civil buildings, such as factories, warehouses, and locomotive depots. The metal roller forming machine is a single roll forming unit that can produce various specifications of C-shaped steel sandalwood products with rolling rolls.