Cold roll forming equipment has great competitiveness both domestically and internationally. The traditional cross-sectional steel is produced by hot or cold rolling, pulling and pressure forming at room temperature to produce various cross-sectional steel shapes. But with the emergence of cold bending steel equipment, both domestically and internationally, electric current and infrared radiation have been used to preheat steel plates before proceeding with forming work.
The difference between cold roll forming equipment and traditional methods is that it does not need to be carried out at room temperature, but instead uses a heated bending method. Everyone may think that the application of cold roll forming equipment is very simple, but due to their neglect of some details, many problems arise, such as incorrect startup methods. Below, we will specifically explain how to start the cold roll forming equipment.
Before starting the cold roll forming equipment, everyone must place the equipment in a stable position and not shake it artificially. Then, open the legs of the chassis, which is beneficial for everyone to observe. Subsequently, connect the power supply. Generally, the power supply for cold roll forming equipment is a three limit power supply.
Then we should turn on the main power supply of the chassis, and then adjust the value. If the indicator light is on, then we can proceed to the next step. Then, the sealing of the cold roll forming equipment should be inspected and operated on different materials to ensure the quality of the steel. Also, pay attention to the deviation of the cold roll forming equipment, as it supports the contraction and expansion of the terminal. Generally, it can only indicate a small part.