Common auxiliary processing techniques on Rollfomer

2023-06-01

1、 Punching process. This is a process that is commonly used on most profiles, and many profiles are perforated. However, integrating the punching process on a rolling forming machine is not complicated, so the punching process is very common.

2、 Cutting or cutting process. On rolling forming machines, cutting is a necessary process, either after forming or before or during forming. And punching cuts (notches) is also a process commonly used on many forming machines.

3、 Welding process. Welding process is generally used after forming, and a set of welding machines are installed randomly in the cutting machine of the forming machine, including laser welding, sub argon arc welding, and other methods.

4、 Embossing and embossing techniques. To emboss decorative patterns or company specific logos on formed profiles, embossing or embossing techniques should be used.

5、 Marking process. This process is generally carried out after molding. Printing on profiles using auxiliary printing equipment, such as product model, production date, company name, etc., can all be completed using this process

6、 The above mentioned are the most common auxiliary processes, while other uncommon auxiliary processes include: expansion, flanging, slitting, punching holes, bending, local stamping, oblique cutting, slitting, buckle, bonding, painting, foaming, and so on.