As an important equipment in modern production, the correct use and maintenance are very important. When used, make sure the machine is placed on a flat ground to avoid vibration or dumping of the machine due to uneven ground. Before operation, check whether all parts of the machine are normal, and any abnormality should be handled in time to avoid affecting the production process.
Before startup, ensure that the power cord is well connected with no exposed parts to prevent electric shock accidents. When adjusting the machine parameters, be sure to follow the specified steps, and do not change the set value at will. During the production process, the wear of the rolling wheel and the mold should be checked regularly. If excessive wear or damage is found, it should be replaced in time to ensure the product quality and machine performance.
In addition, in order to ensure the long-term and stable operation of the machine, the machine should be maintained regularly. Apply key wear as recommended by the manufacturer to prevent wear. At the same time, keep the equipment clean to avoid the accumulation of debris and dirt.
When operating the purlin high-speed rolling forming machine, be sure to wear protective glasses and other personal protective equipment to prevent splashes from injuring people. In case of emergency, such as equipment failure or power supply problem, it should stop immediately and take corresponding measures. Following these use requirements can help to improve production efficiency, ensure operation safety, and extend the service life of the machine.