The use process of paving steel plate rolling forming machine mainly includes the following steps:
First, the machine is preheated to ensure that the rolling molding machine reaches the working temperature. This step usually takes 30 minutes to 1 hour to ensure the stable operation of the machine at work.
Secondly, the steel plate to be formed is placed at the feeding inlet of the rolling molding machine, and the machine parameters, such as wheel spacing, wheel speed, are adjusted to adapt to the steel plate of different thickness and material.
Next, start the rolling molding machine and roll the steel plate slowly through the roller. The roller will pressure the steel plate according to the preset parameters to produce plastic deformation to the desired shape.
During the rolling process, the operator needs to closely monitor the deformation of the steel plate, and adjust the roller spacing or rotation speed in time to ensure the forming quality.
After the rolling is completed, the steel plate will be output from the other end of the forming machine. At this point, the operator should check whether the size and shape of the molding steel plate meet the requirements. If there is any deviation, readjust the machine parameters.
Finally, the finished product is cut, polished and other follow-up processing to meet the use needs.
During the whole use process, the operators should strictly follow the safety operation procedures to ensure the production safety and product quality.