The operation of the machine mainly includes the following steps:
Check the equipment: Before operation, ensure that all parts of the machine are complete, tight and well lubricated, and check whether the power supply and control system are normal.
Adjust the mold: select the appropriate mold according to the required Angle steel specifications, and adjust the position and clearance of the mold to ensure the forming effect.
Prepare materials: place the raw materials of thin-walled corner steel at the feed inlet to ensure that the material surface is smooth without damage.
Open the equipment: turn on the power supply, start the control system, adjust the running speed and pressure, and make the equipment into the standby state.
Operation molding: the raw materials into the molding machine, through the control button or lever, so that the raw materials in the mold.
Cutting: During the forming process, the cutting device to ensure the accurate size.
Inspection quality: check the forming Angle steel to ensure the smooth surface, accurate size, no deformation and other quality problems.
Collection: Collect the formed Angle steel and pile it up neatly for subsequent treatment.
Close off the equipment: After operation, turn off the power and control system and clean and lubricate the equipment.
Safe operation: During the whole operation process, pay attention to safety, avoid the hands and other body parts in contact with high-speed moving parts, to ensure the safety of operators.
The operation of thin-wall Angled steel forming machine needs to master the equipment performance and operation skills, and follow the operation procedures to ensure the smooth production.