The working principle of corrugated roller forming machine mainly depends on the cooperative work of upper corrugated roller and lower corrugated roller appearing in pairs. These two rollers are combined in the single side machine with the rubber roller, pressure roller and other components, and jointly complete the production process of corrugated board.
Specifically, the corrugated base paper first adjusts the tension through the guide roller, then controls the humidity through the preheating roller, and then slides over the corrugated roller into the corrugated channel between the heating roller. Here, corrugated base paper is pressed and ironed molding, forming corrugated core paper. After forming the corrugated core paper continues to move forward, after the glue roller, its corrugated summit is coated with a layer of glue. Then, the corrugated paper after the glue with the corrugated roller continue to run, the paste gradually after heating. So, two layers of corrugated cardboard were produced.
In the whole process, the engagement mechanism of upper and lower corrugated roller plays a key role. The lower corrugated roller is an active roller, and the shaft end is equipped with a gear, which is driven by the motor through the deceleration device. The upper corrugated roller is a driven roller, which relies on the roller teeth of the lower corrugated roller. In order to make the corrugated base paper between the upper and lower corrugated roller pressing molding, a certain pressure must be applied on the upper corrugated roller. This pressure is achieved by applying a radial force to the two ends of the corrugated roller, which creates a biting pressure.
The working principle of corrugated roller forming machine reflects the precision and high efficiency of modern mechanical design. Through the cooperative work of each component, not only realize the continuous and efficient production of corrugated board, but also ensure the stability and reliability of product quality. At the same time, with the continuous progress and innovation of technology, the working principle of corrugated roller forming machine is also constantly optimized and improved to adapt to the changing market demand.