The operation mode of the shelf roller machine mainly includes the following steps:
First of all, before operation, ensure that the shelf roller is in a safe state, check whether the moving parts are well lubricated, and appropriate lubricating oil should be added on the sliding surface. Meanwhile, confirm that the safety guard is completely closed to avoid accidental injury during operation.
Then, according to the specifications of the shelves and goods, adjust the height, width and compaction force of the roller, to ensure that these parameters are set reasonably, to ensure the rolling effect and the stable operation of the equipment. At the same time, choosing the appropriate speed and pressure force may need to be finely adjusted for different types of shelves and goods.
Before starting the equipment, confirm that the control mode is selected correctly and check if each signal is normal. After starting, observe the running state of the equipment to ensure that there is no abnormal vibration, hydraulic oil leakage or noise problems. Once the abnormal situation is found, it should immediately stop for inspection and remove the fault before continuing the operation.
During the operation process, special personnel shall be arranged to operate the machine, and the staff shall undergo professional training to be familiar with the equipment performance and operation process. During the rolling process, it is necessary to pay attention to the state of the shelves and goods to ensure that there is no displacement or deformation.
When stopping, the pneumatic valve should be closed first, and the main and mechanical machine should be stopped after the material is emptied and the roller seam returns to the original position. Finally, stop the oil station and remove the pressure to ensure that the equipment stops running completely. After shutdown, necessary cleaning and maintenance to extend the service life of the equipment.
In short, the operation of the shelf roller should be carried out in strict accordance with the procedures to ensure the safe and effective operation to achieve the expected rolling effect.