C & Z purlin forming machine is a kind of efficient and automatic steel structure production equipment, mainly used for the production of C and Z type purlins. Here is how the device is used:
1. dead work
Before using the C & Z purlin forming machine, ensure that the equipment is in good working condition and check whether the parts are in good condition, especially the key parts such as punching device, cutting device and forming device. At the same time, prepare the required steel coil raw materials, and ensure that its quality meets the requirements.
2. operating process
1. Put the raw material of the coil into the rolling device and send the coil into the rolling device through the rolling device.
2. The open coil unfolds the coil and guides it to the next step through the guide.
3. Punch the steel coil on the punching device as required for subsequent connection and installation as required.
4. Cutting device Cut the steel coil into the required purlin length according to the preset length.
5. The forming device forms the cut steel coil to form C or Z purlins.
6. The formed purlin is stacked by the automatic stacking device to facilitate the subsequent transportation and use.
3. matters need attention
In the process of use, you should always pay attention to the running state of the equipment, and if there is any abnormality, you need to shut down immediately for inspection. At the same time, the equipment should be maintained and maintained regularly to ensure its long-term and stable operation. In addition, the operators should be professionally trained to be familiar with the operation process and safety specifications of the equipment.
The use method of C & Z purlin forming machine is relatively simple, but it should strictly follow the operation process to ensure the production efficiency and product quality.