1. First, measure the four corners of the front and rear rows of the color steel tile machinery equipment from the height of the upper end of the shaft of the big frame, and then from the front row to the back row, find a line to straighten it, and check, the lower shaft is Not in a straight line, adjust the left and right ends of the lower axis to be horizontal.
2. Find the middle of the color steel tile mechanical equipment from the front row to the back row, then fasten the lock nuts at both ends, and draw a straight line before and after the middle of the middle wheel, and adjust the gap between the upper and lower shafts. , the machine can be adjusted in a straight line.
3. Color steel tile machinery equipment - the debugging method of the deviation of the pressing plate of the tile press, such as the plate running to the right, padding the left corner (feeding frame), or falling to the right bottom level (the number of axes running off the axis and the bottom level of the axis, The upper shaft falls with the lower shaft).
The mechanical equipment of color steel tile has a reasonable layout, convenient operation and complete functions. Color steel tile equipment is used for steel layout factory house panels. The color steel tile equipment adopts fine low-speed metering pump, frequency conversion speed regulation, (or stepless speed regulation), computer control, and accurate measurement. Color steel tile mechanical equipment can also be called roll forming, that is, on a row of serial forming mills, contact through metal plates and metal strips, and in turn make color steel tile equipment use fine low-speed metering pumps, frequency conversion speed regulation, (or stepless speed regulation), computer control, accurate measurement.
Color steel tile mechanical equipment can also be called roll forming, that is, on a row of serial forming mills, the metal plates and metal strips are connected to each other to bend them in turn, and the flat plates are processed into the plasticity of the required cross-sectional shape. processing method. Roller cold forming (color steel tile machinery and equipment) has been used for bicycle rims, umbrella skeleton production, etc.