Color steel tile machinery. Color steel equipment tile pressing machine belongs to cold-rolled steel equipment. At present, its operation is not too complicated. Because there is a computer control system, you only need to input the size and data you need into the computer in the actual production process. The control system will complete the production according to the relevant input, which is simple and convenient.
The detection part of the tile pressing machine of the color steel equipment includes: the pulse encoder for detecting the length of the colored steel tile, the up and down travel switch of the pressing profile, the up and down travel switch of the cutter, the up and down operation buttons of the profiled profile, the up and down travel button of the cutter, emergency stop switch, hydraulic start-stop switch, etc.
, , , , , , , ,
We often receive many after-sales calls, and customers may encounter many problems in the future production process, which is inevitable. At this time, we can call the manufacturer, or we can handle or even prevent some minor problems by ourselves. for example:
1. Hydraulic oil circuit
The tile press should also be checked after the maintenance of the hydraulic system, and the oil level of the fuel tank should be checked weekly. The oil level should be filled with hydraulic oil if the oil level is lower than the oil window; it should not exceed 70 ℃. The oil temperature of the system should be between 35°C and 60°C. If it is too high, the oil quality and accessories will be degraded and damaged. The oil should be changed after the new machine works for 2000 hours. The oil tank should be cleaned every time the oil is changed.
2. Hydraulic components
Do not use detergents; 1. Clean the hydraulic components (base plate valve motor pump oil pipes, etc.) every month to prevent dirt from entering the system. Check whether the bends of the oil pipes of the tile press are deformed. 2. After the new machine is used for one month, if there is any abnormality It should be replaced. After two months of use, the connections of all accessories should be tightened. When this work is performed, the system should be turned off and the system is free of pressure.
3. Filter
The filter should be replaced or thoroughly cleaned; 1. Every time the oil is changed. Check and clean every 3 months. 2. The air filter on the fuel tank should be replaced once a year. Clean and other filter exceptions.