-
Many friends want to know this question, and relevant experts in the industry introduce that the main purpose of seismic support is to bear the load in the horizontal direction of the pipeline. Laying equipment can effectively change the dynamic characteristics of the piping syst...
-
The cold-formed steel machine is a special unit for cold-formed profile forming, which is designed and customized according to the requirements of users, and is a non-standard equipment. The cold-formed steel machine first installs the raw materials on the uncoiler, manually feed...
-
The trough cold-formed forming line is a kind of cold-formed steel machinery. It is specially used for the production of trough equipment. The metal sheet is first uncoiled, leveled and then punched, and then enters the cold-formed main machine. The trough profile required for br...
-
You should maintain good application habits when using the steel roll forming machine at ordinary times. Before starting the equipment, the mold should be sorted and cleaned to keep the mold neat. The need for regular maintenance can provide more convenient conditions for product...
-
Many processing places now pay attention to the application of steel roll forming machine. The operation method of this kind of equipment is very simple in the process of use, and the staff can master the application method in a short time. Moreover, compared with traditional equ...
-
The heating part of the steel roll forming machine includes a triangular cutting machine, a dyeing machine, a loading machine, a reversing device at the bottom of the heating furnace, a pipe drawing machine, a cooling table, etc. The cold processing part includes straightening ma...
-
1. Each pass of the cold-formed steel machine should be stressed evenly so that the wear can be balanced, thereby prolonging the service life of the roll. 2. During the rolling process of cold-formed steel machinery, the rolling stability must be considered. If the material is de...
-
The roll in the roll forming machine is a very important part of it. Its design and manufacturing features are as follows: each pass should be stressed evenly so that the wear can be balanced, thereby prolonging the service life of the roll. A basic principle of the roll forming ...
-
During the cold bending forming process of steel roll forming machine, due to the friction between the roll and the surface of the strip, the surface scratches caused by heat must be formed during the molding process of the lubricated and cooled roll. Roll forming lubricants are ...
-
For the steel roll forming machine, whether it is its roll or the horizontal wheel road, it should be effectively protected by the tube bundle. service life. Generally, the roll of steel roll forming machine is made of C12MoV material, because this material has good wear resistan...
-
When selecting roll forming equipment, we must first pay attention to the diameters of the three top rolls: it must be consistent with the type of steel that has been pre-cold-bent. The top roll has a small diameter, and because of the small contact surface, it is easy to slip du...
-
Before the steel roll forming machine starts to work, it is necessary to check the power supply, motor oil pump, pressure gauge, overflow valve, electro-hydraulic valve and jog switch of the machine to see if it is normal and whether there is any problem. Carry out processing so ...
Many friends want to know this question, and relevant experts in the industry introduce that the main purpose of seismic support is to bear the load in the horizontal direction of the pipeline. Laying equipment can effectively change the dynamic characteristics of the piping syst...